RFID контроллер доступа H2002D 125Khz ID

Technical parameters:

1. Working voltage DC12V2. working current < 100 mA3. user capacity: 25004. Heavy volume 80 g5. Read the card types: 13.56Mhz IC card or 125Khz EM/ID card6. Ambient temperature - 20 to 60 Degree7. Card read distance: 1-10cm

Set the card:Step 1: power off, connect S1 jumper cap 2, 3, side, back to electricity, three nights after the green light flash.Step 2: brush two consecutive blank card (the first one to increase the card, the second delete card), the red light flashing, continuous short at this time.Step 3: power off, reconnect the jumper cap 1, 2, and finally to electricity, card increase.

Add or Del users:Add user: in standby mode, brush "add card", then brush to add user card in a row, then brush "add card" to exitDelete users: in standby mode, brush "Del card", then brush to remove user card in a row, then brush "Del card" to exitDelete all user: in standby mode, brush "Del card", then brush "add card", then brush "Del card" to exit.